Essential Advice for First Time Wallpapering
You’ve probably seen it done many times, and while it does look like a simple enough task, many DIY enthusiasts come unstuck when they first try their hand at wallpapering. It makes perfect sense to spend a little time thinking about the task at hand, and with that in mind, here is some useful advice when applying wallpaper for the first time.
- Removing the Existing Wallpaper – This could turn out to be extremely easy, or it could be a nightmare, and it very much depends on the type of wallpaper and the paste. One good idea is to soak the first strip to be removed with warm water mixed with a little detergent, which helps the water stay on the wall. After 5 minutes, detach a top corner with a scraper or cutter and gently pull down at an angle, and if the sheet begins to come away intact, you should have no problems. If it doesn’t, you might have a job on your hands, and it could take you a couple of days to completely remove all the wallpaper in a room.
- Surface Preparation – Like everything, wallpapering involves some surface preparation, which means filling any hollows and making sure there are no bumps. The surface of the wall should be smooth to the touch, and make sure you brush all the dust and debris well before you start to paper. If you are looking for unique wallpaper murals in the UK, an online search will bring up a list of suppliers of both wallpaper and wall murals, and the addition of murals will add some depth and colour to the room. If the entire room is now free of the old paper and everything has been cleaned up, you are ready for the next stage.
- Prepare the Equipment – Obviously, you will need a pasting table, which can be sourced at any hardware store. You could use the dining table, providing it is longer than the strips you are applying. The best way to apply the paste is with a paint roller, as it gives an even coat and actually uses less paste than if applied with a brush. You paste should be mixed in a bucket, and if you are using a paint roller, pour the paste into the accompanying tray, a little at a time. You will need a straight edge, a sharp cutter, and a flat edge to smooth the paper, which removes any air bubbles.
- Aligning the First Strip – Ideally, you should start at one of the room corners, and it is essential that the first strip is straight, as every strip will be following this model. You should allow four inches overlap on the top and bottom, and the excess can be cut off when you have finished. Don’t rush, as this is the cause of many mishaps, and by working with one strip at a time, you should be able to minimise issues.
Wallpapering is not difficult, and providing you think things through and take a methodical approach, the finished job should look like it was done by a professional decorator.