4 Tips on How to Select the Perfect Skip for All of Your Needs
If you’re on the lookout for a residential skip to hire in the Doncaster area, one of your main concerns should be what size of skip to hire. Skips come in a wide range of different sizes, and remember that the one you choose can make quite a big difference to your hire fees and project. Should this is be your first time of hiring a skip, check out the useful advice below to ensure you select the perfect sized skip.
- What the Size of the Skip Means
- In most cases, the most common skip rental sizes range from 3, 4, and 6 to 10 metre containers. Their size is determined in cubic metres as a measurement of their volume.
- For instance, a 3 metre skip can hold up to 3 cubic metres of debris (3 standard trailer loads or 6 wheelie bins), but a 10 metre can hold up to around triple that amount (10 standard trailer loads or 20 wheelie bins). It’s vital that you have an understanding of this aspect if you are hiring a Doncaster Skip Hire for the first time, it can make quite some difference.
- Measure Your Project’s Size
- You will require a clear insight of what your project will need. To work out what size skip you will be working with, try figuring out how much debris you will have if it’s possible. Making just an approximate guess of the volume of debris will make the job that much simpler.
- It’s as easy an act of just taking a tape measure and the classic length X width X height formula. And remember that debris doesn’t always settle as you would like it in a skip. Things like boards, crates, and other such bulky pieces can take up more room than you might think. It’s always in your best interests to miscalculate by over-estimating your space requirements.
- Space and Place
- Try taking a moment and ponder over the space where you’re going to have the skip dropped off. Measure the area to ensure you know precisely what size can be fitted in there and also the height too. The bigger roll-off skips can be 1.6 metres tall, which may cause for throwing some types of debris in, slightly hard.
- Have a good look at your job and compare it to what other sizes are used for. That way you will get a reasonable insight as to what type skip hire you require.
- Skip Fees
- Hiring a skip can cost you if you don’t go about it the correct way, so bigger is not always better.
- Do not make the error of heightening your waste haulage requirements, and also be just as careful not to underestimate what you need as well. Have a chat with the good people at the skip hire service and they should be more than able to set you right.
With the right service and expertise, your Project will work out just fine!